EasyManua.ls Logo

ComAp InteliLite 4 AMF 20

ComAp InteliLite 4 AMF 20
620 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
InteliLite4 AMF20 Global Guide
476
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1250
Description
This is an output from the Exercise timer 1. This output makes it easy to make periodic tests of the Gen-set
and its activation depends on the setpoints in the Subgroup: Timer 1 (page 292) subgroup. This output
is active when Timer 1 is active.
Note: In the event that both Timers are active at the same time, Subgroup: Timer 1 (page 292) has a
higher priority than Subgroup: Timer 2 (page 300).
Exercise Timer 1
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1251
Description
This is an output from the Exercise timer 2. This output makes it easy to make periodic tests of the gen-set
and its activation depends on the setpoints in the Subgroup: Timer 2 (page 300) subgroup. This output
is active when Timer 2 is active.
Note: In the event that both Timers are active at the same time, Subgroup: Timer 1 (page 292) has a
higher priority than Subgroup: Timer 2 (page 300).
Exercise Timer 2
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1946
Description
This is an output from the Exercise timer 3. This output makes it easy to make periodic tests of the Gen-set
and its activation depends on the setpoints in the Subgroup: Timer 3 (page 308) subgroup. This output
is active when Timer 3 is active.
Note: In the event that both Timers are active at the same time, Subgroup: Timer 3 (page 308) has a
higher priority than Subgroup: Timer 3 (page 308).
Exercise Timer 3
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1947
Description
This is an output from the Exercise timer 4. This output makes it easy to make periodic tests of the Gen-set
and its activation depends on the setpoints in the Subgroup: Timer 4 (page 316) subgroup. This output
is active when Timer 4 is active.
Note: In the event that both Timers are active at the same time, Subgroup: Timer 4 (page 316) has a
higher priority than Subgroup: Timer 4 (page 316).
Exercise Timer 4
6 back to Logical binary outputs alphabetically

Table of Contents

Related product manuals