ComAp InteliLite 4 AMF 20

InteliLite4 AMF20 Global Guide
81
Note: Use Up and
Down button to
select required
setpoint group.
Note: Use the Enter button to enter selected setpoint group.
Note: Use Up and
Down button to
select required
setpoint.
Note: Use the Left and the Right button to select required setpoint.
Note: Use the Enter button to enter selected setpoint.
Note: Use Up and
Down button to set
required value of
selected setpoint.
Note: Use the Enter button to confirm adjusted value of setpoint.
Note: Use the Page button to discard changes, to set setpoint to previous value and to return to the list of
setpoints of selected group.