InteliLite Global Guide
266
Group: General Analog Inputs
General Analog Input 1
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9259 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input AIN PROT01 (PAGE 640) is configured
Description
Warning or history threshold level for AIN PROT01 (PAGE 640).
Note: These setpoints are used only if LAI AIN PROT01 (PAGE 640) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 1 Wrn
6 back to List of setpoints
Setpoint group General Analog Inputs Related FW 1.9.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 9260 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input AIN PROT01 (PAGE 640) is configured
Description
Shutdown or BOC threshold level for AIN PROT01 (PAGE 640).
Note: These setpoints are used only if LAI AIN PROT01 (PAGE 640) is adjusted to required protection
type. Otherwise these setpoints are useless.
Analog Protection 1 Sd
6 back to List of setpoints
To Next Page
Loading...
