ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
461
Group: Load
Value group Load Related FW 1.9.0
Units A
Comm object 8198 Related applications AMF, MRS
Description
Load current phase L1.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load A L1
6 back to List of values
Value group Load Related FW 1.9.0
Units A
Comm object 8199 Related applications AMF, MRS
Description
Load current phase L2.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load A L2
6 back to List of values
Value group Load Related FW 1.9.0
Units A
Comm object 8200 Related applications AMF, MRS
Description
Load current phase L3.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load A L3
6 back to List of values
Value group Load Related FW 1.9.0
Units [-]
Comm object 8395 Related applications AMF, MRS
Description
Character of the load. “L” means inductive load, “C” is capacitive and “R” is resistive load (power factor = 1).
Load Characteristic
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65