ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
464
Value group Load Related FW 1.9.0
Units kVAr
Comm object 8527 Related applications AMF, MRS
Description
Load reactive power in phase L1.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kVAr L1
6 back to List of values
Value group Load Related FW 1.9.0
Units kVAr
Comm object 8528 Related applications AMF, MRS
Description
Load reactive power in phase L2.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kVAr L2
6 back to List of values
Value group Load Related FW 1.9.0
Units kVAr
Comm object 8529 Related applications AMF, MRS
Description
Load reactive power in phase L3.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kVAr L3
6 back to List of values
Value group Load Related FW 1.9.0
Units kW
Comm object 8202 Related applications AMF, MRS
Description
Load active power.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kW
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65