ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
465
Value group Load Related FW 1.9.0
Units kW
Comm object 8524 Related applications AMF, MRS
Description
Load active power in phase L1.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kW L1
6 back to List of values
Value group Load Related FW 1.9.0
Units kW
Comm object 8525 Related applications AMF, MRS
Description
Load active power in phase L2.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kW L2
6 back to List of values
Value group Load Related FW 1.9.0
Units kW
Comm object 8526 Related applications AMF, MRS
Description
Load active power in phase L3.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Load kW L3
6 back to List of values
Load Load Related FW 1.9.0
Units [-]
Comm object 8204 Related applications AMF, MRS
Description
Generator power factor.
Load Power Factor
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65