ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
466
Load Load Related FW 1.9.0
Units [-]
Comm object 8533 Related applications AMF, MRS
Description
Generator power factor in phase L1.
Load Power Factor L1
6 back to List of values
Load Load Related FW 1.9.0
Units [-]
Comm object 8534 Related applications AMF, MRS
Description
Generator power factor in phase L2.
Load Power Factor L2
6 back to List of values
Load Load Related FW 1.9.0
Units [-]
Comm object 8535 Related applications AMF, MRS
Description
Generator power factor in phase L3.
Load Power Factor L3
6 back to List of values
Group: Dual Operation
Value group Dual Operation Related FW 1.9.0
Units
Comm object 16046 Related applications AMF, MRS
Description
This value shows how long it will take until the swap between gen-sets will be made.
Running Hours To Swap
6 back to List of values
Value group Dual Operation Related FW 1.9.0
Units
Comm object 16044 Related applications AMF, MRS
Description
This is actual value of running hours of Master controller used in dual operation function (Running Hours
(page 471) + Running Hours Base (page 240)).
Master Running Hours
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65