ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
469
Group: Statistics
Value group Statistics Related FW 1.9.0
Units kVArh
Comm object 8539 Related applications AMF, MRS
Description
Counter of gen-set reactive power.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Genset kVArh
6 back to List of values
Value group Statistics Related FW 1.9.0
Units kWh
Comm object 8205 Related applications AMF, MRS
Description
Counter of gen-set active power.
Note: This value can be also switch into one decimal power format (via InteliConfig PC tool). In this
case the range of value is decrease 10 times.
Genset kWh
6 back to List of values
Value group Statistics Related FW 1.9.0
Units hours
Comm object 11616 Related applications AMF, MRS
Description
Countdown until next maintenance 1. Initial value can be set in Maintenance Timer 1 (page 219).
Maintenance 1
6 back to List of values
Value group Statistics Related FW 1.9.0
Units hours
Comm object 11617 Related applications AMF, MRS
Description
Countdown until next maintenance 2. Initial value can be set in Maintenance Timer 2 (page 220).
Maintenance 2
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65