ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
470
Value group Statistics Related FW 1.9.0
Units hours
Comm object 11618 Related applications AMF, MRS
Description
Countdown until next maintenance 3. Initial value can be set in Maintenance Timer 3 (page 220).
Maintenance 3
6 back to List of values
Value group Statistics Related FW 1.9.0
Units [-]
Comm object 11195 Related applications AMF, MRS
Description
Emergency stop alarms counter.
Num E-Stops
6 back to List of values
Value group Statistics Related FW 1.9.0
Units [-]
Comm object 8207 Related applications AMF, MRS
Description
Engine start commands counter. The counter is increased by 1 even if the particular start command will take
more than one attempt.
Num Starts
6 back to List of values
Value group Statistics Related FW 1.9.0
Units -
Comm object 10986 Related applications AMF, MRS
Description
This is the value of PULSE COUNTER 1 (PAGE 534) function.
Pulse Counter 1
6 back to List of values
Value group Statistics Related FW 1.9.0
Units -
Comm object 10987 Related applications AMF, MRS
Description
This is the value of PULSE COUNTER 2 (PAGE 535) function.
Pulse Counter 2
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65