ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
472
Value group Statistics Related FW 1.9.0
Units days
Comm object 13770 Related applications AMF, MRS
Description
Assessment in days when the fuel tank will be empty.
Note: This value is based on setpoint Fuel Tank Volume (page 216) and value from ECU Fuel Rate.
For correct calculation of this value is necessary to have configured ECU which send Fuel Rate value,
otherwise this value can’t be calculated.
Time Till Empty
6 back to List of values
Value group Statistics Related FW 1.9.0
Units hours
Comm object 13771 Related applications AMF, MRS
Description
Assessment in hours when the fuel tank will be empty.
Note: This value is based on setpoint Fuel Tank Volume (page 216) and value from ECU Fuel Rate.
For correct calculation of this value is necessary to have configured ECU which send Fuel Rate value,
otherwise this value can’t be calculated.
Time Till Empty
6 back to List of values
Value group Statistics Related FW 1.9.0
Units minutes
Comm object 13772 Related applications AMF, MRS
Description
Assessment in minutes when the fuel tank will be empty.
Note: This value is based on setpoint Fuel Tank Volume (page 216) and value from ECU Fuel Rate.
For correct calculation of this value is necessary to have configured ECU which send Fuel Rate value,
otherwise this value can’t be calculated.
Time Till Empty
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65