ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
473
Value group Statistics Related FW 1.9.0
Units L
Comm object 9040 Related applications AMF, MRS
Description
Value containing total amount of consumed fuel by engine. The controller automatically updates this value
every 30 s. The controller can calculate it in three ways:
Direct reading from ECU
Calculation based on actual fuel consumption reading from ECU
Calculation from fuel level drop in tank (using Fuel Level Analog Input + Fuel Tank Volume (page
216) setpoint)
Note: The accuracy of Total Fuel Consumption depends on the precision of ECU values or precision of
Fuel Tank Volume (page 216) and fuel level sensor.
Total Fuel Consumption
6 back to List of values
Group: IL Info
Value group IL Info Related FW 1.9.0
Units [-]
Comm object 8480 Related applications AMF, MRS
Description
The value contains actual application in controller.
Application
6 back to List of values
Value group IL Info Related FW 1.9.0
Units [-]
Comm object 9245 Related applications AMF, MRS
Description
The value contains actual “breaker state” message which is shown on the main screen of the controller.
Breaker State
6 back to List of values
Value group IL Info Related FW 1.9.0
Units [-]
Comm object 12944 Related applications AMF, MRS
Description
The text of this value represents the connection type which is adjusted in setpoint Connection type (page
177).
Connection Type
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65