ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
547
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1549
Description
This output is active when the Wrn Fence 2 Alarm (page 657) or BOC Fence 2 Alarm (page 684) or Sd
Fence 2 Alarm (page 675) (depends on configuration of alarm type) alarm is present in the alarmlist or isn’t
confirm.
AL Fence 2
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1423
Description
The output is closed when there is the shutdown or BOC alarm from the FUEL LEVEL (PAGE 632) in the
alarmlist or isn’t confirmed.
AL Fuel Level Sd
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1422
Description
The output is closed when there is the warning alarm from the FUEL LEVEL (PAGE 632) in the alarmlist or isn’t
confirmed.
Note: Binary output is also active if protection type is set to HistRecOnl and threshold level for history
record is reach.
AL Fuel Level Wrn
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1267
Description
This output is active generator frequency warning alarm is present in alarmlist or isn’t confirm.
AL Gen Freq Wrn
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1266
Description
This output is active when at least one generator frequency BOC or Sd alarm is present in alarmlist or isn’t
confirm.
AL Gen Frequency
6 back to Logical binary outputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65