ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
657
Alarm Type Warning
Alarmlist message Wrn Fence 2 Alarm
Alarm evaluated All the time
Related applications AMF, MRS
Description
This alarm evaluates the GPSposition of gen-set. The following setpoint are
related to it:
Geo-Fencing (page 324)
Fence 2 Protection (page 326)
Fence Radius 2 (page 323)
Wrn Fence 2 Alarm
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Fuel Level
Alarm evaluated All the time
Related applications AMF, MRS
Description
This alarm indicates that the fuel level is lower than the level set in Fuel Level
Wrn (page 214) setpoint.
Wrn Fuel Level
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Fuel Theft
Alarm evaluated All the time
Related applications AMF, MRS
Description
This alarm occurs when the fuel level value measured at relevant AI (Fuel Level)
drops faster than is the limit adjusted by setpoint Maximal Fuel Drop (page 216).
Wrn Fuel Theft
6 back to List of alarms level 1
Alarm Type Warning
Alarmlist message Wrn Generator L1 > Voltage
Alarm evaluated Generator excited only
Related applications AMF, MRS
Description
This alarm evaluates the generator phase voltage in phase 1. The following
setpoints are related to it:
Generator Overvoltage Wrn (page 231)
Generator <> Voltage Delay (page 232)
Wrn Generator L1 > Voltage
6 back to List of alarms level 1

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65