HOW TO CONTACT THE COMAU SERVICE CENTER
61
Comau Robotics Product Instruction
5.4 Robot repackaging procedure and shipping to
Comau for technical assistance
– Equipment and material required
– Robot disassembly and repackaging procedure
5.4.1 Equipment and material required
For the disassembly and repositioning of e.DO inside the original packaging, the
following equipment is required:
– 2.5 mm Allen wrench
– e.DO original box and packaging
– additional packaging material (e.g. bubble wrap sheets) for Robot protection
– packaging adhesive tape.
The procedure described in the following paragraphs describes the correct positioning
inside the original packaging (for shipment to Comau for assistance) and the operations
to be carried out if the Robot presents damage such as to prevent its movement in
transport position.
To Next Page
Loading...
