Commodore 128D - Page 392

u
COMMAND: X
PURPOSE: Exit to BASIC. i j
SYNTAX: X I—J
COMMAND: > (greater than) v i
PURPOSE: Can be used to set one to 16 memory locations at a 1—'
time.
SYNTAX: > <address> <data byte) 1 <data byte 2 ... 8> [ i
<address> First memory address to set.
<data byte 1 > Data to be put at address.
<databyte2...8> LJ
Data to be placed in the suc
cessive memory locations
following the first address
(optional) with a space pre
ceding each data byte.
COMMAND: @ (at sign)
PURPOSE: Can be used to display the disk status.
SYNTAX: @ [<unit#>], <disk cmd string) LJ
<unit #> Device unit number
(optional). ^ »
<disk cmd string) String command to disk. *—J
NOTE: @ *alone gives the status of the disk drive.
EXAMPLES:
@ checks disk status
00, OK, 00, 00
@,l initializes drive 8
@ ,$ Checks the directory on Unit 8
@,$0:F* List all files on Unit 8, drive 0 beginning with the
letter "F"
388 APPENDIX J-Machine Language Monitor