Low Power Outdoor (LPOD) Amplifier/Block Up Converter (BUC)
Revision 15
Ethernet Interface Operation 4–30 MN-LPOD
Alarm Mask
Use the drop-down lists to select an alarm as Fault, Alarm, or Masked.
Use the drop-down lists to select an alarm as Fault, Alarm, or Masked.
Use the drop-down lists to select an alarm as Fault, Alarm, or Masked.
Extenal Reference Lock
Detected
Use the drop-down lists to select an alarm as Fault, Alarm, or Masked.
Use the drop-down lists to select an alarm as Fault, Alarm, or Masked.
Click [Reset] to restore your previous settings.
Click [Change Alarm Mask] to save these settings.