CONCH HM Series - Settings of Communication Parameters: (According to Linked Device)

6 Instruction of the Wiring & Setting of Supported Communication Devices
95
HM Series Connection Manual
6.16.3. Settings of Communication Parameters:
(According to Linked Device)
Parameters
Default Value
Setting Range
Device Address
0
fixed
Communication Mode
RS422
Baud Rate
9600 bps
Data Length
8 bits
Parity Check
Odd
Stop Bit
1 bit
Command Delay Time
0
0 ~ 1000 ms
RTS/CTS Handshaking
Enabled
fixed
HMI Address
255
fixed