CONCH HM Series - Settings of Communication Parameters: (According to Linked Device)

6 Instruction of the Wiring & Setting of Supported Communication Devices
25
HM Series Connection Manual
R6:n.0/FD
FD = 8
Control Size of Bit Array
R6:n.LEN/b
n = 0~254
b = 0~15
Control Reserved file
R6:n.POS/b
n = 0~254
b = 0~15
Integer file
N7:n.0/b
n = 0~254
b = 0~15
b = 0
6.2.3. Settings of Communication Parameters:
(According to Linked Device)
Parameters
Default Value
Setting Range
Device Address
1
Communication Mode
RS232C
Baud Rate
19200 bps
Data Length
8 bits
Parity Check
None
Stop Bit
1 bit
Command Delay Time
0
0 ~ 1000 ms
HMI Address
0