CONCH HM Series - Settings of Communication Parameters: (According to Linked Device)

6 Instruction of the Wiring & Setting of Supported Communication Devices
79
HM Series Connection Manual
6.13.3. Settings of Communication Parameters:
(According to Linked Device)
Parameters
Default Value
Setting Range
Device Address
0
0 ~ 15
Communication Mode
RS232
RS232 / RS485 / RS422
Baud Rate
9600 bps
4800 bps ~ 19200 bps
Data Length
7 bits
7 bits / 8 bits
Parity Check
Even
None / Odd / Even
Stop Bit
1 bit
1 bit / 2 bits
Command Delay Time
0
0 ~ 1000 ms
HMI Address
255
fixed
PLC Sum Check
Enabled
fixed
Controlling Format
Format1 / Format4