Condair EL - Page 50

50 Operating the control software
– Software Update: with this function you can update the control software
of the integrated controller. See information in chapter 6.7.
– Driver Board A.DB.A: with this function you can update the driver board
software of steam humidier A. See information in chapter 6.7.
– Driver Board A.DB.B Update: with this function you can update the driver
board software of steam humidier B. See information in chapter 6.7.
Software Update Tab
– Load Contact Info Page: this function allows you to upload new contact
information data (which are displayed when pressing the <Help> button)
from a USB memory stick connected to the USB port on the control board.
– Manually Load Contact Info: this function allows you to manually change/
enter contact information data (which are displayed when pressing the
<Help> button).
– LoadLoggerDenition: this function allows logging of system parameters
with a FAT32 formatted USB memory stick connected to the USB port
on the control board. A factory supplied access le is required to enable
operation.
Software Settings Tab