Condair Sigma - Options

15Product Overview
3.6 Options
Condair Sigma...
422 522
524
532
534
822
824
832
834
1532
1534
2362
2364
3262
3264
4564 6564
Remote operating and fault indication
PCB with relay contacts for the connection
of remote displays for "Operation", "Steam",
"Fault" and "Service".
--- 1xRFI
Overpressure set
Kit for mounting the water cup to the unit cover
when operating the steam generator in systems
with a duct air pressure of up to 10 kPa.
--- 1xOPS
Terminals heating voltage
Separate terminals for systems where direct
connection of heating voltage to main contac-
tor (standard version) is not permitted by local
regulations.
--- 1x
S-THV
1x
M-THV
1x
L-THV
Steam hose connector with condensate trap --- 1xCT22 1xCT35 2xCT35
Cable glands (with metric thread) --- CG
Terminal strip kit for internal control vol-
tage supply
Terminal strip kit to provide control voltage sup-
ply for sites with 3 phase single voltage supply
with neutral conductor
(400V/3~N/ 50..60 Hz).
--- 1x
S-CVI
1x
M-CVI
1x
L-CVI
Transformer for internal control voltage
supply
Kit including terminal strip and transformer to
provide control voltage supply for sites with 3
phase single voltage supply without neutral
conductor
(400V/3~/ 50..60 Hz).
--- 1xM-Trafo 1xL-Trafo
24 VDC power supply
24 VDC power supply for the external humid-
ity sensor
--- 1x24VDC
SC pump (lime management system)
The SC pump keeps the solved minerals in
the water of the steam cylinder in motion, in
order to discharge them with the automatic
drain cycles.
--- 1xSC
Condair Sigma... (400 V/3~/50...60 Hz)
534 834 1534 2364 3264 4564 6564
Steam cylinder for low water conductivity
from 80 to 125 µS/cm
1x
534A-L
1x
834A-L
1x
1534A-L
1x
2364A-L
1x
3264A-L
1x
4564A-L
___