74 Taking out of service/Disposal
9 Taking out of service/Disposal
9.1 Taking out of service
If the Condair Sigma must be replaced or is not needed any more, proceed as follows:
1. Take the unit out of operation as described in chapter 6.5.
2. Have the unit (and all other system components, if necessary) unmounted by a qualied service
technician.
9.2 Disposal/Recycling
Components that are no longer used must not be disposed of with household waste. Please dispose of
the device or individual components in an authorized collection point in accordance with local regulations.
If you have any questions, please contact the responsible authority or your Condair representative.
Thank you for your contribution to protecting the environment.
To Next Page
Loading...