7For your safety
2 For your safety
General
Every person working with the Condair Sigma must have read and understood the present installation
and operating instructions before carrying out any work.
Knowing and understanding the contents of the installation and operating instructions is a basic require-
ment for protecting the personnel against any kind of danger, to prevent faulty operation, and to operate
the unit safely and correctly.
All ideograms, signs and markings applied to the unit must be observed and kept in readable state.
Qualicationofpersonnel
All actions described in the present Installation and operating instructions (installation, operation, mainte-
nance, etc.) must be carried out only by welltrainedandsufcientlyqualiedpersonnelauthorised
by the owner.
For safety and warranty reasons any action beyond the scope of this manuals must be carried out only
by qualied personnel authorised by the manufacturer.
It is assumed that all persons working with the Condair Sigma are familiar and comply with the appropri-
ate regulations on work safety and the prevention of accidents.
This unit may not be used by persons (including children) with reduced physical, sensory or mental
abilities or persons with lacking experience and/or knowledge, unless they are supervised by a person
responsible for their safety or they received instructions on how to operate the unit.
Children must be supervised to make sure that they do not play with unit.
Intended use
The steam generator Condair Sigma is exclusively intended for the production of steam for SPA
applicationswithinthespeciedoperatingconditions (see chapter 10). Any other type of applica-
tion without the express written consent of the manufacturer is considered as not conforming with the
intended purpose and may lead to the Condair Sigma becoming dangerous.
Operation of the equipment in the intended manner requires that all the information in this installation
and operation manual is observed (in particular the safety instructions).
To Next Page
Loading...
