73Fault elimination
8.3 Notes on fault elimination
DANGER!
Danger of electric hazard!
For the elimination of faults set the steam generator out of operation as described in chapter 6.5,
separate the unit from the mains and secure it against inadvertent power-up.
The elimination of faults must be carried out by qualied and well trained professionals only.
Malfunctions relating to the electrical installation (e.g. replacement of fuses) must be repaired by author-
ized personnel or by your Condair representative’s service technician only.
Repair work and the replacement of faulty components must be carried out by your Condair representa-
tive’s service technician only!
8.4 Resetting the error indication (red LED lights)
To reset the error indication:
Disconnect the steam generator from the mains. Wait approx. 5 seconds, then reconnect the
unit to the mains.
Note: If the fault has not been eliminated, the error indication reappears after a short while.
To Next Page
Loading...
