Contec CMS8000 Manual

-
-
-
- 115 -
-
-
-
1
1
1
1 6
6
6
6 .2.2
.2.2
.2.2
.2.2 Operation
Operation
Operation
Operation for
for
for
for CO2
CO2
CO2
CO2 Measurement
Measurement
Measurement
Measurement



 Sidestream
Sidestream
Sidestream
Sidestream
Figure
Figure
Figure
Figure 16-1
16-1
16-1
16-1 sample
sample
sample
sample canula
canula
canula
canula
Figure
Figure
Figure
Figure 16-2
16-2
16-2
16-2 SideStream
SideStream
SideStream
SideStream Module
Module
Module
Module
1. The Sidestream module can be used for intubated and non-intubated patient.
2. I nsert LEMO interface to socket( CO2) of the monitor
3. Connect the sample cell to the module,the sampling pump automatically turns on .Perform
sample cell zero.
4. Place the sampling line on the patient . Removal the sample cell automatically turns sampling
pump off.
5. Capnogram displayed in less than 20 seconds, at an ambient temperature of 25 ° C, full
specifications within 2 minutes .

Contec CMS8000 Specifications

General

Category	Medical Equipment
Device Name	Contec CMS8000
Type	Patient Monitor
ECG Lead Mode	3-lead or 5-lead
Resolution	800 x 600
Power Supply	AC 100-240V, 50/60Hz
Battery	Rechargeable lithium battery
Operating Temperature	5°C to 40°C
Storage Temperature	-20°C to 55°C
Display	TFT LCD
Screen Size	12.1 inches
Parameters	ECG, RESP, NIBP, SpO2, TEMP, PR
Interface	Ethernet, Nurse call
Humidity	15% to 95% non-condensing
Battery Life	Approximately 4 hours