Parameter
structure
Keypad and
display
Parameter x.00
Parameter description
format
Advanced parameter
descriptions
Serial comms
protocol
Performance
Menu 11
Mentor MP Advanced User Guide 159
Issue Number: 4 www.controltechniques.com
This parameter displays the externally installed resistor temperature calculated by the protection model in terms of percentage.
This is the voltage measured on the bucket suppressor. If this voltage rises this indicates that there are voltage transients present on the supply and
an external resistor may be required to limit the voltage.
11.65 External resistor temperature
Coding
BitSPFIDETEVMDPNDRANCNVPTUSRWBUPS
111 1
Range 0 to 100 %
Update rate Background write
11.66 Suppressor voltage
Coding
BitSPFIDETEVMDPNDRANCNVPTUSRWBUPS
11111
Range 0 to 2000 V
Update rate Background write
To Next Page
Loading...
