Control Techniques Mentor MP

Menu 1
Parameter
structure
Keypad and
display
Parameter x.00
Parameter description
format
Advanced parameter
descriptions
Serial comms
protocol
Performance
22 Mentor MP Advanced User Guide
www.controltechniques.com Issue Number: 4
5.2 Menu 1: Speed reference
Menu 1 controls the main reference selection.
*Refer to Pr 1.14 (SE05, 0.26) on page 27.
Preset reference*selector
Preset reference scan time
Keypad
Reference
Precision reference
Precision-reference update disable
Analog reference 1
Analog reference 2
Analog reference 2 select
Preset reference select bits 1 ~ 3
Preset reference Scan-timer reset
Analog input 1
Analog input 2
Memory
Menu 71.361.371.41
1.161.48
1.15
1.17
1.201.18
Precision reference trim1.19
Preset reference select
Keypad reference selectPrecision reference
select
LOCAL/REMOTE
Menu 8
Level of
referenceselectedReference offset
Reference offset mode select
Reference*selector Reference selected indicator
1.49
1.14
1.09
1.04
Reference percentage
trim
1.381.01
Analog reference
Preset reference
Keypad reference
Precision reference
++
0.XX0.XX
Key
Read-write (RW) parameterRead-only (RO) parameterInputterminalsOutputterminals
The parameters are all shown in their default settings
1.51Power-up keypadcontrol modereference
1.20Preset reference
selected
indicator
Preset references 1 to 8 1.21 ~ 1.28
Scan timer
1.471.461.45
1.441.43
1.42
Pr set to
greater than 1
1.50
1.50Pr 1.49
1122345
6
Pr 1.50
1>11>1xxx
x
Reference being used
1.501.50
Analog reference 1Preset reference defined by Pr Analog reference 2Preset reference defined by Pr Keypad referencePrecision reference
Keypad reference only
Preset reference defined by Pr 1.50
Keypad onlyselect 1.52
Preset reference
*selector
Preset
reference
scan time
Keypad
Reference
Precision
reference
Precision-reference
update disable
Analog
reference 1
Analog
reference 2
Analog reference 2
select
Preset reference select bits 1 ~ 3
Preset reference
Scan-timer reset
Analog input 1
Analog input 2
Memory
Menu 7
1.36
1.37
1.41
1.16
1.48
1.15
1.17
1.20
1.18
Precision
reference trim
1.19
Preset
reference
select
Keypad
reference
select
Precision
reference
select
LOCAL/REMOTE
Menu 8
Level
of
reference
selected
Reference
offset
Reference
offset mode
select
Reference
*selector
Reference
selected
indicator
1.49
1.14
1.09
1.04
Reference
percentage
trim
1.38
1.01
Analog reference
Preset reference
Keypad reference
Precision reference
+
+
0.XX
0.XX
Key
Read-write
(RW)
parameter
Read-only (RO)
parameter
Input
terminals
Output
terminals
The parameters are all shown in their default settings
1.51
Power-up keypad
control mode
reference
1.20
Preset
reference
selected
indicator
Preset
references
1 to 8
1.21 ~ 1.28
Scan timer
1.47
1.46
1.45
1.44
1.43
1.42
Pr set to
greater than 1
1.50
1.50
Pr 1.49
1
1
2
2
3
4
5
6
Pr 1.50
1
>1
1
>1
x
x
x
x
Reference being used
1.50
1.50
Analog reference 1
Preset reference defined by Pr
Analog reference 2
Preset reference defined by Pr
Keypad reference
Precision reference
Keypad reference only
Preset reference defined by Pr
1.50
Keypad only
select
1.52
Figure 5-1 Menu 1 logic diagram