UD70
Issue code: 70nu2
Parameters 10-5
Control word
Bit Controls...
b15 Set b15 at 0 for b6 to have no effect on #1.46
Set b15 at 1 for b6 to control #1.46
b14 Set b14 at 0 for b5 to have no effect on #1.45
Set b14 at 1 for b5 to control #1.45
b13 #18.33
b12 Set b12 at 0 for b3 to have no effect on #6.32
Set b12 at 1 for b3 to control #6.32
b11 Set b11 at 0 for b2 to have no effect on #6.31
Set b11 at 1 for b2 to control #6.31
b10 Set b10 at 0 for b1 to have no effect on #6.30
Set b10 at 1 for b1 to control #6.30
b9 Set b9 at 0 for b0 to have no effect on #6.15
Set b9 at 1 for b0 to control #6.15
b8 #18.32
b7 #18.31
b6 #1.46
b5 #1.45
b4 Trip
b3 #6.32
b2 #6.31
b1 #6.30
b0 #6.15
To Next Page
Loading...
Need help?
General
