Control Techniques UD70 User Manual

UD70
Issue code: 70nu2
DPL toolkit 5-7
Appending
instruction
lines
Use the following procedure to copy lines in a specific order from
File Viewer to the program being written:
1 Select in turn the lines shown in File Viewer that are to be copied to
the new program.
2 After each selection, click on (AppendAppend).
3 Place the cursor in the required position for the lines to appear in the
new program.
4 Open the EditEdit menu and select Paste Paste in the drop-down menu.
BookMarks
BookMarks are useful for negotiating long programs. A BookMark is
inserted into a program where the writer needs to refer to a location on a
regular basis. A number of BookMarks may be used in a single program.
Setting a
BookMark
1 Position the cursor in the program where the BookMark is to be
placed.
2 Click on (BookMarkBookMark).
Returning to
a BookMark
1 Click on (NextNext BookMarkBookMark).
2 The cursor goes to the BookMarkBookMark that has been placed. If the
Next BookMark button is clicked on again, the cursor highlights the
next BookMark. BookMarks are highlighted in the order they were
placed.
Clearing
BookMarks
Open the EditEdit menu, and select ClearClear AllAll BookMarksBookMarks.

Control Techniques UD70 Specifications

General

Brand	Control Techniques
Model	UD70
Category	Control Unit
Language	English