Cupra FORMENTOR 2024 - Background Lighting

136
Lights
Drive prole
Individual
O
Background lighting
Fig.108 Schematic representation:
Background lighting.
Background lighting provides lighting in dier-
ent areas of the interior.
There are predened versions of Ambient
Light ›››Fig.108.
The intensity of the lighting can be adjusted
using the function button :
Lights up the interior of the vehi-
cle depending on the selected drive pro-
le.
To adjust the intensity of the back-
ground lighting in each of the areas as well
as to change the colour in the versions
that have lighting on the front door panel
and the instrument panel line.
Turns o the background lighting.
Additional functions of the background
lighting
●
Door open alert: Representation on the line
of the respective front door if the vehicle rea-
ches 10 km/h while either of the two front
doors is not closed properly.
●
Rear windows locked alert: Representation
on the line of the respective front door when
the operation buttons of the rear windows are
pressed, if they have been locked with the
safety button
›››page113 and the vehicle is
locked (Auto Lock).
●
Representation of the hazard warning
lights: Animation on the entire background
lighting line while the hazard warning light
function is active.
●
Representation of acceleration: Animation
on the entire background lighting line when
accelerating. This function is only represented
in the Cupra when the link between the back-
ground lighting and the drive prole is activa-
ted. If a door has been left open, the “Door
Open Alert” will be displayed at a speed above
10km/h.
The representation of these functions by the
background lighting can be switched on and
o both individually and as a whole in the in-
fotainment system: > Vehicle > Lighting >
Settings.