Cupra FORMENTOR 2024 - Adjusting the Exterior Mirrors

Visibility
141
Mirrors
1)
Do the opposite in right-hand drive vehicles.
2)
Not available in all markets.
/
Adjusting the exterior mirrors
Fig.112 Driver’s door detail: exterior
mirror control.
Turn the control to the corresponding posi-
tion.
By moving the control to the desired po-
sition, adjust the rear view mirrors on the
left side ( ) and on the right side ( ) in the
desired direction.
Depending on the equipment tted on
the vehicle, the mirrors may be heated
according to the outside temperature.
Fold the mirrors ››› .
The exterior mirror cannot be adjusted
and all functions are deactivated.
Activating exterior mirror functions
The following exterior mirror functions can
be activated and deactivated in the vehicle
settings menu of the infotainment system
›››page39.
Note
The exterior mirror functions are described
below. For left-hand drive vehicles, position
corresponds to the exterior mirror on the
driver’s side and position corresponds to
the exterior mirror on the passenger’s side.
Do the opposite for right-hand drive vehi-
cles.
Synchronized regulation of the exterior mir-
rors
The synchronised mirror setting simultane-
ously adjusts the right hand exterior mirror
when the left mirror is adjusted
●
Turn the control to position
1)
.
●
Adjust the left-hand exterior mirror. The
right exterior mirror will be adjusted at the
same time (synchronised).
●
If necessary, correct the setting of the right
hand mirror: turn the control to position
1)
.
Folding the exterior mirrors when locking
the vehicle
When the vehicle is locked or unlocked from
the outside, the exterior mirrors may fold in
or out automatically, depending on the equip-
ment. For this purpose, the rotary control has
to be in position , , , or .
If the rotary control of the electric exterior mir-
rors is in the folded position, the exterior mir-
rors remain folded.
Memory function
The memory buttons ›››page126 can be
used to save and turn on settings for the exte-
rior mirrors.
The settings will also be saved in the user of
the online services
2)
.
Saving the passenger rear view mirror set-
tings for reversing
●
Switch the ignition on.
●
In the infotainment system, select > Vehi-
cle > Exterior > Mirrors ›››page39.
●
Select position
1)
on the control.
●
Select reverse gear.