Cupra FORMENTOR 2024 - Indications about the Technical Data; Technical Data; Vehicle Identification Data

400
Technical data
Technical data
Indications about the
technical data
Vehicle identication data
The values indicated in the technical data may
dier depending on optional equipment or
version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the oicial vehicle docu-
mentation takes precedence at all times.
Abbreviations used in the Technical Speci-
cations section
kW
Kilowatt, engine power measure-
ment.
PS
Horsepower (not currently
used), engine power measure-
ment unit.
rpm,
1/min
Revolutions per minute – engine
speed.
Nm
Newton metres, unit of engine
torque.
CZ
Cetane number, indication of
the diesel combustion power.
RON
Research octane number, indi-
cation of the knock resistance of
petrol.
Vehicle Identication Number (VIN)
The vehicle ID number can be found in the
following places:
●
Front, visible through the small window on
the lower left side of the windscreen.
●
One the vehicle's data label.
●
To the right in the engine compartment.
Type plate
The type plate is located on the vehicle’s right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Performance
The values apply only to optimal road and
weather conditions.
The vehicle’s performance has been calcula-
ted without any equipment that would aect it,
e.g. accessories.
Fuel consumption
Approved consumption values are derived
from measurements performed or supervised
by certied EU laboratories, according to the
legislation in force at the time (for more infor-
mation, see the Publications Oice of the Eu-
ropean Union on the EUR-Lex website: © Eu-
ropean Union, http://eur-lex.europa.eu/) and
apply to the specied vehicle characteristics.
The values relating to fuel consumption and
CO
2
emissions can be found in the documen-
tation provided to the purchaser of the vehicle
at the time of purchase.
Fuel consumption and CO
2
emissions depend
on the equipment/features of each individual
vehicle, as well as on the driving style, road
conditions, traic conditions, environmental
conditions, load or number of passengers.
Tank level
Vehicles with front-
wheel drive:
50 l, 7 l reserve
Vehicles with all-wheel
drive
55 l, 8.5 l reserve
Plug-in hybrid vehicles
(PHEV)
40 l, 8 l reserve
Adblue® tank volume
approx. 11 l
a)
approx. 12 l
a)
a)
The amount lled using a dispenser nozzle may
be less. In conditions of extreme cold, the amount
lled may be less. The values depend on the equip-
ment.