Cupra FORMENTOR 2024 - Service Intervals

24
Driver information
Restart the oil service
Select the Reset Oil service menu and follow
the instructions on the instrument panel dis-
play.
Identifying letters on engine (LDM)
Select the menu Engine code. The identifying
letters of the engine will be shown on the in-
strument cluster display at the bottom left.
Next Service
This species when the next workshop inspec-
tion is scheduled.
Service intervals
The service interval display appears on the
instrument cluster screen and in the infotain-
ment system.
There are dierent versions of instrument pan-
els and infotainment systems, so the versions
and instructions on the screens may vary.
CUPRA distinguishes between services with
engine oil change (e.g. Oil change service)
and services without engine oil change (e.g.
Inspection).
In vehicles with Services established by time
or mileage, the service intervals are already
pre-dened.
In vehicles with
LongLife Service, the intervals
are determined individually. Thanks to techno-
logical progress, maintenance work has been
greatly reduced. The oil only needs to be
changed when the vehicle requires it. To cal-
culate this variation (max. 2 years), the vehi-
cle's conditions of use and individual driving
styles are considered. The advance warning
rst appears 20 days before the date estab-
lished for the corresponding service. The kilo-
metres (miles) remaining until the next service
are always rounded up to the nearest 100 km
(miles) and the time is given in complete days.
The current service message cannot be viewed
until 500 km after the last service. Prior to this,
only lines are visible on the display.
Inspection reminder
If a service or an inspection has to be carried
out soon, a service reminder will be displayed
when the ignition is switched on.
The gure displayed are the kilometres that
can still be travelled or the time until the next
service.
Service due
When the time for a service or an inspec-
tion comes, an audible warning will be emitted
when the ignition is switched on and the xed
key symbol
may appear on the instrument
panel for a few seconds, along with one of the
following messages:
●
Service now!
●
Please have your vehicle inspected
●
Oil change service due!
●
Oil change service and inspection due!
Consult a service notication
With the ignition switched on, the engine o
and the vehicle at a standstill, the current serv-
ice notication can be read:
Check the date of the current service on the
infotainment system:
●
Press Settings.
●
Select the Data connection menu option to
display information about services.
Checking the date on the digital instrument
panel:
●
The date of the service can only be read
through the Service ›››page23 menu.
Resetting service interval display
If the service was not carried out by a special-
ised CUPRA dealer or any dealer in the SEAT
network, the display can be reset as follows:
●
The service interval display can only be reset
through the Service ›››page23 menu.
Do not restart the indicator between the serv-
ice intervals, otherwise the information dis-
played will be incorrect.