1)
Only valid for hybrid vehicles (extended stationary air conditioning).
Switching air recirculation on and o
●
Press the button to switch air recirculation
on or o.
WARNING
Stuy or used air will increase fatigue and re-
duce driver concentration possibly resulting
in a serious accident.
●
Never leave the fresh air fan turned o or
use the air recirculation for long periods of
time; the air in the vehicle interior will not be
refreshed.
NOTICE
In vehicles with an air conditioner, do not
smoke when air recirculation is switched on.
The smoke may be deposited on the cooling
evaporator and on the active combination l-
ter and cause permanent unpleasant odours.
Note
When the outside temperature is very high,
briey switching on the air recirculation
mode helps to cool the vehicle interior more
quickly.
Seat heating
The front seats have three levels of electric
heating.
Controlling seat heating
Press the icon on the Climabar
A
to open
the seat heating menu.
●
Press the left or right seat icon to connect
the seat heating to maximum power.
●
Press the left or right seat icon repeatedly
until the desired level is adjusted.
●
To switch o seat heating, press the corre-
sponding seat icon several times until no LED is
on.
●
You can also adjust the seat heating level by
using two ngers to press the sensor eld
1
or
2
(left or right seat).
If the ignition is switched on again in approx.
the next 10 minutes, the driver seat heating is
automatically turned on to the level set the last
time.
Smart heated seat
This is an smart function that automatically ac-
tivates and regulates the driver and front pas-
senger seat heating for greater comfort.
The seat heating for the driver's seat and front
passenger seat can be adjusted separately to
achieve fully personalised comfort.
To access the smart heated seats function,
the CUPRA CONNECT personalisation service
must rst be activated ›››page261.
●
To switch the function on/o, select >
Seats > Settings > Use of the driver/front
passenger smart heated seats.
The smart heated seats function requires a
period for learning usage habits. Information
about the start of the learning process is
shown in the seat heating submenu on the
Infotainment display. During this process, the
status LEARNING will be displayed, and its evo-
lution will also be shown by a progress bar.
Seat heating level 3 (maximum) needs to be
used to ensure that habits are learned cor-
rectly.
During the learning period, it is advisable to
use the seat heater at dierent outside tem-
peratures to achieve optimal performance of
the smart heated seats.
The system will not learn about the use of the
seat heating if it is used straight after using the
seat heating with stationary air conditioning.
1)
Once the learning period is over, the heated
seats are turned on and their temperature level
adjusted automatically. The status AUTO is dis-
played in the seat heating submenu.
To optimise the temperature provided by the
system during automatic adjustment (AUTO),
manually set the three seat heating levels to
To Next Page
Loading...
