Cupra FORMENTOR 2024 - Steering Wheel Heating

152
Air conditioning
●
In hybrid vehicles the use of the station-
ary air conditioning function with electricity
consumers ›››page157 may aect the
learning time of the function.
Steering wheel heating
The selected steering wheel heating level will
be displayed on the instrument cluster display
and in the air conditioning menu.
Adjusting steering wheel heating by pressing
on the multifunction steering wheel
●
Short press (less than 1 second):
Heating is switched on at its maximum level.
Press the steering wheel button repeatedly to
set the desired level. To switch o steering
wheel heating, press the steering wheel button
repeatedly until the heated steering wheel
icon is displayed on the instrument cluster.
●
Long press (more than 1 second):
Heating is switched o directly from the cur-
rent operating level. Another long press on the
button switches on heating directly at the last
level saved before switching o.
Adjusting steering wheel heating via the in-
fotainment system
●
In the air conditioning menu, press the steer-
ing wheel heating function button . Heating
is switched on at its maximum level.
●
Press the function button repeatedly to set
the desired level.
●
To switch o steering wheel heating, press
the function button several times until no LED
is on.
Automatic disconnection
Steering wheel heating will be switched o au-
tomatically when any of the following condi-
tions are met:
●
Electrical energy consumption is too high.
●
The steering wheel heating system is faulty.
●
If the ignition is switched o.
Parking ventilation
With the parking ventilation function (depend-
ing on equipment), the passenger compart-
ment can be ventilated.
The power required for parking ventilation will
be provided by the vehicle's 12V battery.
The ventilation function is controlled using the
My CUPRA App.
Connecting parking ventilation
The function will be switched on as follows:
●
The parking ventilation function can be
switched on immediately using the immediate
on/o button in the My CUPRA App.
●
By programming a departure time.
In the event of low level charge of the 12V bat-
tery, the parking ventilation will not turn on.
Disconnecting parking ventilation
The parking ventilation will turn o in the fol-
lowing situations:
●
When the operating time for the immediate
on/o mode has elapsed.
●
The parking ventilation function can be
switched o immediately using the immediate
on/o button in the My CUPRA App.
●
When the scheduled departure time has
been reached.
The maximum operating period of the parking
ventilation is 60 min.
Programming a departure/trip start
The activation of the parking ventilation for a
scheduled time is only valid for a single ventila-
tion process. The departure time must be for
each newly programmed ventilation process.
Before programming the departure time, you
must check that the date and time of the car
are correctly set.
When programming a departure time, the car
automatically calculates, depending on the
environmental conditions, the necessary op-
erating time of the parking ventilation.