Cupra FORMENTOR 2024 - Revolution Counter

Driver information
17
Instrument panel
ing wheel: navigation map, driving data (press-
ing switches between the dierent memo-
ries).
●
Navigation View: By pressing the button
on the multifunction steering wheel and then
turning the thumbwheel you can view the map
in a larger or smaller view. If you press the
button again, the map returns to automatic
scale.
●
CUPRA view: The revolutions tube is dis-
played in the centre.
Classic View
The revolutions per minute and speedometer
needles appear in full length by a long press on
the button on the multifunction steering
wheel, regardless of the menu displayed in the
central area ›››Fig.1 , ›››Fig.2.
With another long press on the button
, the
display returns to the previous view.
Or looking in the instrument panel menu
for the Close option using the right hand
thumbwheel on the multifunction steering
wheel, and then press .
Information that may be displayed in the
central area of the Digital Cockpit speedom-
eter
●
Audio
●
Telephone
●
Compass
●
Navigation indications (the most recent des-
tinations are displayed by pressing the arrow
on the right of the multifunction steering
wheel)
●
G-force meter.
●
> (close classic view).
Information that may be displayed in the
central area of the Digital Cockpit rev coun-
ter
●
Consumption and average consumption. By
pressing the arrow on the left of the multifunc-
tion steering wheel, you can switch between
the dierent memories of the travel data.
●
Autonomy (fuel tank level).
●
Lubricating oil and coolant temperature
●
Average speed. By pressing the arrow on the
left of the multifunction steering wheel, you
can switch between the dierent memories of
the travel data.
●
Other travel data: km travelled and driving
time. By pressing the arrow on the left of the
multifunction steering wheel, you can switch
between the dierent memories of the travel
data.
●
Assist systems.
●
Engine power and torque.
●
> (close classic view).
CUPRA view
Turning the right hand thumbwheel on the
multi-function steering wheel scrolls through
the following information displayed in the mid-
dle of the rev counter:
●
Speed and gears.
●
Lap timer.
The following information is displayed outside
the rev counter circle:
●
Right-hand area: G-force meter.
●
Left-hand area: engine power and torque.
Revolution counter
The rev counter indicates the number of en-
gine revolutions per minute.
Together with the gear-change indicator, the
rev counter oers you the possibility of using
the engine of your vehicle at a suitable speed.
The beginning of the red zone of the rev coun-
ter indicates the maximum speed in any gear
after running-in and with the engine hot. How-
ever, it is advisable to move the selector lever
to D or lift your foot o the accelerator before
the needle reaches the red zone ›››
.