Curtis 1298 - Page 19

Curtis 1298 Manual, OS 11
15
2 — INSTALLATION & WIRING: Throttle Wiring
pot inputs, switch inputs, or CAN communication messages as the source of
the throttle signals. If you have questions regarding this throttle type, contact
the Curtis office nearest you.
Setting the Throttle Type to Type 5 also allows the throttle inputs to be
redefined by a VCL program for uses other than as throttle inputs. The variable
names that VCL can use to interface with these two inputs are Throttle_Pot_Out
-
put (see page 94) for the drive throttle, and Brake_Pot_Output (see page 99)
for the hydraulic throttle.