Curtis 1298 User Manual

Curtis 1298 Manual, OS 11
63
CLONING (for copying parameter settings to multiple controllers)
Once a controller has been programmed to the desired settings, these settings
can be transferred as a group to other controllers, thus creating a family of
“clone” controllers with identical settings. Cloning only works between
controllers with the same model number and software version. For
example, the programmer can read all the information from a 1298-2205
controller and write it to other 1298-2205 controllers; however, it cannot
write that same information to 1298-2206 controllers.
To perform cloning, plug the programmer (1311 or 1314) into the
controller that has the desired settings. Scroll down to the Functions menu;
“Settings” is the only function included here. Select “Get settings from
controller” to copy the settings into the programmer.
Plug the programmer into the controller that you want to have these
same settings, and select “Write settings to controller.”
Note: For cloning Dual Drive controllers, see the separate Dual Drive
addendum, p/n 38272-DD.
3 — PROGRAMMABLE PARAMETERS: Controiller Cloning

Curtis 1298 Specifications

General

Brand	Curtis
Model	1298
Category	Controller
Language	English