7.3 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life. The following table shows the recommended
planning for the cleaning operations.
EVERY PAPER CHANGE
Printing head Use isopropyl alcohol
Platen roller Use isopropyl alcohol
Window for barcode reading
(1)
Use a soft cloth
EVERY 5 PAPER CHANGES
Cutter Use compressed air
Paper path Use compressed air or tweezers
Sensors Use compressed air
Triple feeder Use the dedicated cleaning kit
(2)
EVERY 6 MONTHS OR AS NEEDED
Case Use compressed air or a soft cloth
Display Use a soft cloth
(3)
NOTES:
If you use the device in dusty environments, you must reduce intervals between cleaning operations.
For ease of reference, in the following pages, for some models is represented only the printer group without external
plastic chassis or triple feeder.
(1) Only for models with barcode reader.
(2) For the cleaning kit for triple feeder, contact the customer service (for KPM302 TF, KPM302 TF-EJ, KPM302 TF-vSEL,
KPM302 TF-hSEL, TK302 TF).
(3) Don’t use any ammonia-based product (for TK302 STD, TK303 STD, TK302 TF)
104
To Next Page
Loading...
