Custom Audio Electronics TK303 User Manual

3.10 Messages on display
The display indicates the hardware status of device. Given in table below are the various display messages and the cor-
responding device status.
TK302 STD, TK303 STD, TK302 TF
PRINTER READY
01/01/17 12:00:00
Device ON: no error
RECEIVING DATA
SPOOLING......
Receive data
RS232 RX ERROR
CHECK RS232 SETTINGS
Reception errors
(parity, frame error, overrun error)
COMMAND ERROR
COMMAND NOT FOUND
Command not recognized
COMMAND ERROR
COMMAND NOT FINISH
Command reception time out
PRINTHEAD OVERTEMP
WAIT COOLING......
Heading over temperature
END PAPER
PLEASE INSERT PAPER
Paper end
PAPER JAM
CLEAR PAPER PATH
Paper jam
POWER VOLTAGE ERROR
CHECK POWER SUPPLIER
Power supply voltage incorrect
COVER ERROR
CLOSE COVERS
Cover open
RAM ERROR
POWER ON AGAIN
RAM error
EEPROM ERROR
POWER ON AGAIN
EEPROM error
CUTTER ERROR
OPEN COVER AND CLEAR
Cutter error
CUTTER ERROR
CUTTER COVER OPEN!
Cutter cover open
PRINT TICKET ERROR!
CHECK TICKETS PATH
Notch alignment error
35

Custom Audio Electronics TK303 Specifications

General

Brand	Custom Audio Electronics
Model	TK303
Category	Printer
Language	English