Custom Audio Electronics TK303 - 3 Description; Box Contents

3 DESCRIPTION
3.1 Box contents
Remove the device from its carton being careful not to damage the packing material so that it may be re-used if the device
is to be transported in the future.
Make sure that all the components illustrated below are present and that there are no signs of damage. If there are, contact
Customer Service.
KPM302 STD, KPM303 STD, KPM302 EJ, KPM303 EJ, KPM302 vSEL, KPM303 vSEL
1. Installation instruction sheet
2. Power supply cable
3. Spacer for paper width < 40 mm
(only for KPM302 STD,
KPM303 STD)
4. 
5. 
kit (only for KPM302 STD,
KPM303 STD)
6. 
(only for KPM302 STD,
KPM303 STD)
7. Ruler
8. Device
1
2
3
4
5
6
7
8
WARNING!
MOVING PARTS
7654321
ALLINEARE AL GUIDA CARTA
FISSO
ALIGN TO THE FIXED
PAPER GUIDE
8
15