Mass Storage / Server FTP
It is possible to add the new logo directly into the folder “PICTURES” on the Flash Drive of the device.
13.1).
To delete a logo stored in the device, proceed as follows:
1. delete the selected logo from the “Pictures” folder on Flash Disk or SD/MMC card;
2.
The logos stored into the Flash Drive or the SD/MMC card and converted by the device, can be printed by using the number
associated to the logo during the conversion step.
with the logo test.
NOTE: To know the IP address of the device, print the setup report of the device (see chapter 6) or use software LO-
CATOR. Type in the address bar “ftp://” followed by the IP address of the device.
ATTENTION:
on the SD/MMC card.
194
To Next Page
Loading...
