23
The device collects the ticket printed.
When printing ends, the device cuts the ticket printed and hold it between the ejector rollers.
The tilting slide is lifted and the ticket printed is driven into the ejection canal.
2
Ticket withdrew
Ejector rollers
Cutter
Ticket printed
Ejector rollers
Tilting slide
NOTE: To enable this issuing method, you need to correctly set the operation mode of the selector device with the
commands 0x1D 0x70 0x6F and 0x1D 0x65 0x05 (see the device commands manual).
77
To Next Page
Loading...
