TK302 STD, TK303 STD, TK302 TF
The device is equipped with a Real Time Clock. Proceed as follows to set the clock.
1
During power-up, press the LF LINE FEED key
to enter the setup configuration.
2
Use the FF FORM FEED key to move the cursor
on the next digit; if the cursor position is
on the latest digit, press the FF FORM FEED key
to exit and save the date/time entered.
Then the device is ready.
The digit to be modified is highlighted.
Press the LF LINE FEED key to modify the value;
every press on the button increases the value by one.
Once the max selectionable value is reached the
counting starts again from 0.
4
LF = ENTER SETUP...
FF = EXIT SETUP...
Set-Up type...
Printer Set/Up
Set-Up type...
Real Time Clock
FF LF
FF LF
5
Press the LF LINE FEED key
to select the Real Time Clock settings.
FF LF
3
Press the FF FORM FEED key to confirm the selection.
The date/time values will be displayed.
Follow the instructions printed on the paper.
FF LF
FF LF
Clock Setup
01/01/17 12:00:00
10 2 3 4 5 6 7 8 9
Clock Setup
01/01/17 12:00:00
10 2 3 4 5 6 7 8 9
99
To Next Page
Loading...
Need help?
General
