CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
1 - 1
1. ABOUT THIS MANUAL
1.1 About This Manual
This Operation Manual has been written by observing the CE directives, the main purpose of the
regulation is in relation to the protection of personal safety and the maintenance of the machine in
good conditions, as it is intended to provide the proper operation procedures to avoid causing danger
and damages to persons and to the machine.
The topics covered in this manual are: important notices about safety, operation procedures, operating
parameters setting, explanation on error situations, maintenance, troubleshooting and clean up
procedures ... etc.
In case of integration to other machinery or equipment is required, it also must be done by observing
the instructions given by this Operation Manual in order to minimize the chances of personal injury or
machine damage due to unpredicted risk factors.
This machine is not intended for use by general public, operation should be allowed to only trained and
qualified persons, which can be classified into 3 categories:
Administrator: Administrators are individuals who should have a deep knowledge of the operation of
the machine, and should have read and understood thoroughly this Operation Manual, in addition, he
has to be properly instructed on the general and local regulations about workplace safety, workers
protection and work environment safety regulations in order to provide a safe condition for the
personnel and the machinery.
Supervisor: Supervisor should have a deep knowledge of the operation of the machine, and should
have read and understood thoroughly this Operation Manual. The personnel in charge should be
qualified engineers in electricity or in mechanics. The supervisor should be able to perform
troubleshooting procedures for the machine and it is his duty to contact the machine manufacturer
when the situations requires.
Operator: Operators should have a good knowledge of the operation procedures of the machine, and
should have read and understood thoroughly this Operation Manual. The operator is also responsible
of performing the general maintenance and clean up of the machine.
1.2 Additional Information
For all consultation regarding the machine or this Operation Manual, for example: optional attachments
or problems concerning machine operation or adjustment, the customer can contact directly the
manufacturer or its representatives, all efforts will be made to satisfy the questions arisen.
To Next Page
Loading...
