CVC 310 - Control Panel Operation; Hand-Held Terminal Interface; LCD Display Screen Descriptions; SelfSetTM Display Sequence

CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
2.2 Label Specifications
Backing Paper Transparent
Label Height Range C: 15~150, D: 15~180, E: 15~220 (mm)
Label Length Range C,D,E: 15~450 mm
Label Roll Inner Diameter 38 mm & 76 mm (1
1
/
2
" & 3")
Max. Roll Outer Diameter Max. 350 mm (14")
Gap between Labels 2 ~ 6 mm (
3
/
32
" ~
1
/
4
")
Width of Backing Paper Over 2 mm (
3
/
32
") each side of label (see Fig 2.2-1)
Labels Placement on Roll
a. Labels rolled around outside (LRO, see 2.2-2)
b. Labels rolled around inside (LRI, see 2.2-3)
2.2.1 Label Specification Diagram
2 - 2
(15
3
/
4
“)
Max.: 350 mm (14”)
76mm & 38mm (3“ & 1½”)
(
3
/
32
“)
(
3
/
32
“)
(
3
/
32
“)
Translucent backin
g
p
a
p
er
2.2.2 Label Rolled Outside (LRO)
Labels are on the outside and roll in clockwise (common use).
Reserve a blank for hot stamp printing if needed.
Fig 2.2-1
Fig 2.2-2
Hot stamped code position
Clockwise