CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
3.4 Important Safety Notices
Please observe the following important safety notices.
Directions should be given to operating personnel ensuring the safety
regulations are observed.
Heed all warning signs placed on the machine by the manufacturer.
The machine should not be installed in high temperature locations, near heat
source, in potentially explosive areas or near combustible materials.
Places affected by heavy vibrations or exposed to possible shocks or impacts
are not indicated for machine installation.
Install the machine on a flat and vibration free floor/foundation.
The machine has to be mounted strictly horizontally.
Wet floor should be avoided around the installation site, machine must be
properly grounded to avoid electrical shocks.
Use a reliable power source according to voltage specified on nameplate.
Machine must be properly grounded. Voltage variations should not exceed the
safety limits.
Keep away from moving machine parts during machine operation. For ease and
safety considerations, it is advisable the operator/technician use appropriate
garments or overalls with the buttons properly buttoned when
installing/adjusting or operating the machine to avoid accidents. Remove all
strange objects from machine surface.
Operator should keep himself in good physical and mental conditions when
operating the machine. Operation of the machine is prohibited if the operator is
under the effects of alcohol or any drug which affects the mental condition.
3 - 3
To Next Page
Loading...