CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
3. SAFETY REGULATIONS
3.1 General Safety Rules
The safety regulations have been provided purely as a guide for the safety of all personnel involved in
the operation, cleaning and maintenance of the equipment covered by this instruction manual. Please
ensure that you have read and understood all safety notices before operating the equipment covered
by this instruction manual, and that the recommendations here enclosed are strictly followed.
The following safety notices must not be considered as a definitive list but should be used to form part
of the overall safety plan applied by the customer when operating, cleaning and maintaining the
equipment covered by this instruction manual. Customers are requested to observe all relevant
statutory safety requirements, regulations or amendments that are or may become legal requirements.
The equipment covered by this instruction manual has been designed to comply with existing health
and safety legislation. If any of the instructions given here is in conflict with your local safety
regulations, please contact the manufacturer before modifying its contents. All warning sign affixed on
the machine are important and should never be detached, replacement should be done immediately if
any sign is loose or lost, thus to ensure the safety of the personnel.
Every reasonable precaution has been taken to ensure that it is electrically, mechanically and
pneumatically safe to undertake the work for which it has been supplied.
3.2 Warning Signs
Item Signs Description
1
WARNING: Personal danger or machine damage
may be caused.
2
ELECTRIC SHOCK: Operate carefully, electric
hazard is present.
3
ROLLING! Keep hands away: a rolling
mechanism is present, keep hands away to
avoid injury.
3 - 1
To Next Page
Loading...