CYBELEC DNC 60 PS User Manual

PAGE 94 USER GUIDE DNC 60 PS
ACCESS BY PASSWORD
By starting the software, the virtual key is always positioned at 0.
 Choose the level to access by pressing one of the combinations
+ , or .
 The message VALUE ? appears.
 Introduce the password and press the
key to validate the pass-
word.
 The message OK and the selected level are displayed if the password
is accepted, or KO if it is refused.
Once the authorization acquired, the operator can change the level among
those authorized to him without reappearing of a new password request. For
instance, a user with access on level 3 can navigate between levels 1, 2 and 3
without having to give his password again.
If level 0 is activated, the access on any other level will require to introduce
the password again.
This request will also appear when the user passes to a superior level (from 0
to 1, from 1 to 2, from 2 to 3, etc.) and he has no access authorization.
Advice If you have accessed to level 3, access to level 0 after your intervention. This
will avoid inadvertently making undesired changes.

CYBELEC DNC 60 PS Specifications

General

Brand	CYBELEC
Model	DNC 60 PS
Category	Control Systems
Language	English