CYBELEC DNC 60 PS - Page 28

PAGE 18 USER GUIDE DNC 60 PS
SEEKING A PRODUCT BY CRITERIA
 Press the key again.
P 28
-- CRITERIA --
CODE
p/d __/__
Th __.__
Lmat _____
DevL ____.__
-- LIST OF PRODUCTS --
P CODE p/d
___ __/__
___ __/__
___ __/__
___ __/__
This page allows to display a list of searched products according to one or
more criteria like the code number, the thickness, the bending length and/or
the unfolded length.
Under the heading --CRITERIA-- are displayed the different criteria accord-
ing to which it is possible to search for a product.
These criteria can be combined, that is it is possible, for example, to ask for
the list of all the products stored using a specific tool pair and having a par-
ticular material thickness.
The products meeting the defined selection criteria are displayed on the sec-
ond half of the screen.
To make a search by criteria, proceed as follows:
 Introduce one or more selection criteria in the fields provided.
 Press
.
If the list contains 7 or more products, the following page or pages can be
displayed by pressing
.